Corrugated Cardboard Production Line
-
Thin Blade Slitter Scorer Machine
Change order fast, 3-8 seconds for changing order, the two machines can be achieved with no slow down immediately for a single.
Automatic tracking production line speed to ensure its synchronization with on-line production management system, and compatibility.
By the high-quality imports of industrial computers and high-performance programmable controller configuration, lower computer control system.
-
Single Facer Machine for Corrugated Production Line
*Single facer is design for producing single-face corrugated paper
-
Sheet Cutter Machine For Corrugated Production Line
1, Cutting length:500mm-9999mm.
2, Cutting precision:±1mm.
3, Uses the independent oil pump and the filter coordinates two groups of copper tubes to distribute in various gears position for the oil,the lubrication and cooling.
4, Helical knife structure,type sawtooth knife,decrease cutting obstruction,low noise.
5, Balance treatment:high quality alloy steel for blade shaft,which helps to keep it good stability.
-
Pre-Heater for Corrugated Production Line
1, The preheater roller is under the stander of the 1st class(grade) pressure vessel of the national.
2, All the surfaces of every rollers have been grinded with high accuracy and chromed plated to less the resistance of paper preheating, long service of using life.
3, Electric to enlarge the preheating area, preheating area can be in 360° to adjust the preheating Area.
-
Hydraulic / Electric Mill Roll Stand For Corrugated Production Line
Working Pressure(mpa):16-18mpa,
lift hydraulic cylinder:Φ100×440mm,
Clamping hydraulic cylinder: Φ63×1300mm
Power Motor for Hydraulic Station:3KW –380V — 50Hz
Magnetic Valve Voltage:380V 50HZ
-
Double Facer MachineDouble Baker
*Corrugated paper enter into the double facer hot parts with heating and molding after pasted glue, and become board after cooling
-
3 Ply Corrugated Cardboard Production Line
–Toothed chuck,manual discbrakes，pneumatic mechanically actuated lift，panning left and right on the middle
–Guide rail length is 4500 mm, the trolley adopt 10 mm plate welding
-
5 Ply Corrugated Cardboard Production Line
Main shaft diameter is 242mm，doublecurve heavy rocker arm, tooth clip,mulitpoint brake,hydraulic lift，left and right translation.
Guide rail length is 6000 mm, the car uses 10 mm plate welding
-
7 Ply Corrugated Cardboard Production Line
Main shaft diameter is 242mm，doublecurve heavy rocker arm, tooth clip,mulitpoint brake, hydraulic lift, left and right translation.
Guide rail length is 6000 mm, the car uses 10 mm plate welding
-
2 Ply Corrugated Cardboard Production Line
Guide rail length is 6000 mm, the trolley adopt 10 mm plate welding